Product Description:
Fiberglass Mesh is a special type of fiberglass fabric, primarily
noted for its alkali resistance. It is made of C or E glass fiber
yarn, primarily composed of silicate, which provides good chemical
stability, and is woven using a special technique. Furthermore,
anti-alkali coating and reinforcing agents are applied to the yarn
and the product is subjected to a high-temperature treatment for
additional finishing. It is an ideal material for use in
construction and decoration engineering.
Features:
1.Good chemical stability: Alkali-resistant, acid-resistant,
waterproof,, cement erosion-resistant, and other chemicals'
corrosion resistant; and strong resin bonding, soluble in styrene.
2.Good dimensional stability, stiffness, smoothness an difficult to
shrink and deformation, good positioning property..
3.Good impact resistance and not easy to be teared.
4.Fire resistant, thermal insulation, sound insulation, insulations
etc.
Technical Parameters:
| SPE | Weight(g/m2) | Roll diameter | CBM(square meter) | 20GP | 40GP | 40HC |
|---|
| 4x4and5x5 | 160 | 17cm | 50,000 | 100,000 | 115,000 |
| 4x4and5x5 | 145 | 16.5cm | 52,000 | 105,000 | 125,000 |
| 4x4and5x5 | 130 | 16cm | 55,000 | 115,000 | 130,000 |
| 4x4and5x5 | 110 | 15cm | 60,000 | 125,000 | 150,000 |
| 4x4and5x5 | 100 | 15cm | 60,000 | 125,000 | 150,000 |
| 4x4and5x5 | 80 | 14cm | 70,000 | 145,000 | 170,000 |
| 4x4and5x5 | 60 | 13.5cm | 75,000 | 155,000 | 185,000 |
The table above presents information about the SPE, Weight in g/m2,
Roll diameter, CBM(square meter), 20GP, 40GP and 40HC. For the
4x4and5x5 group, the weight ranges from 160g/m2 to 60g/m2 while the
roll diameters from 17cm to 13.5cm respectively. The CBM for 20GP,
40GP and 40HC respectively are 50,000, 100,000 and 115,000 when the
weight is 160g/m2. As the weight decreases, the CBM for all the
three types of containers respectively increases to 75,000, 155,000
and 185,000 when the weight is 60g/m2.
Applications:
To repair a wall, you should first keep it clean and dry. Then,
attach tape into the cracks and compress it. Confirm that the gap
is covered with tape, then cut off the excess tape using a knife.
After that, brush on the plaster and let it naturally dry. Gently
polish it and apply enough paint to make it smooth. Finally,
removed the leaked tape and pay attention to all the cracks and
make sure they are properly repaired. Fill those cracks with subtle
seam of composite materials to give it to modify the surrounding
and make the wall look as bright and clean as new.
Packing and Shipping:
Construction Wire Mesh products will typically be packaged in rolls
and shipped in wooden crates or pallets. The rolls of wire mesh
will be securely fastened with straps and the pallets or crates
will be secured with shrink wrap. Fragile components, such as sheet
metal or steel bars, will be individually wrapped with bubble wrap
or foam to minimize the risk of damage during shipping.
FAQ:
Q1: What is the brand name of the Construction Wire Mesh?
A1: The brand name of the Construction Wire Mesh is XMESH.
Q2: What is the model number of the Construction Wire Mesh?
A2: The model number of the Construction Wire Mesh is XMESH-908.
Q3: Where is the Construction Wire Mesh manufactured?
A3: The Construction Wire Mesh is manufactured in Hebei, China.
Q4: What is the minimum order quantity for the Construction Wire
Mesh?
A4: The minimum order quantity for the Construction Wire Mesh is
200m2.
Q5: What is the price of the Construction Wire Mesh?
A5: The price of the Construction Wire Mesh is US$0.10-0.85/m2.
